For Homes and Renters
Kitchen sinks take the most daily wear in the house. We fix jams, leaks, and slow drains without tearing up your kitchen.
- Disposal hums but won't spin
- Water under the sink
- Slow drain after grinding
Sink and Garbage Disposal Services Arlington Heights IL
When your kitchen sink backs up or the disposal just hums, our sink and garbage disposal services Arlington Heights IL crews get you running again fast. We handle garbage disposal repair Arlington Heights homeowners trust for jammed units, leaking flanges, and dead motors, plus full sink swaps. Call (224) 643-9856 and we'll diagnose it, quote it, and fix it before we leave.
Test the motorCheck the flangePressure-test lines- Drop cloths downFloors and cabinets protected first
- Written price firstYou approve before we start
- Dry-towel checkEvery connection tested under pressure
- Old unit hauledWe take the old disposal with us
What Our Sink and Disposal Service Covers
Every job starts with a full look under the sink, not just the failed part. Here's what's included in a standard visit, and what we'll flag if we find it.
Disposal Diagnosis and Repair
We test the motor, check the flywheel, clear jams with an auger, and replace failed units. Common brands like Moen, Delta, and Kohler are on the truck in 1/2 HP and 3/4 HP sizes.
Sink Leak Repair
Leaks at the supply line, P-trap, drain assembly, or disposal flange get traced with leak detection equipment and repaired with new fittings, plumber's putty, and Teflon tape.
Faucet and Drain Service
A dripping faucet or slow drain gets fixed at the same visit. We replace worn cartridges, clear the drain assembly, and check the P-trap for corrosion.
Supply Line and Valve Check
We inspect the shut-off valves and supply lines while we're under the sink. A seized valve or a bulging line gets quoted before we touch it, so you decide.
Full Sink Replacement
Cracked basins and outdated sinks get replaced with a new basin, drain assembly, and disposal connection. Most jobs take two to four hours, including cleanup.
Testing and Cleanup
We run hot water through the disposal, check every connection with a dry towel, and confirm the drain empties fast. The old unit leaves with us and the cabinet gets wiped down.
Homes and businesses.
The approach is the same for a home and a business. What changes is the access, the schedule and who needs the paperwork.
For Businesses
Commercial kitchens can't afford a sink that backs up during service. We diagnose fast and carry common commercial parts.
- Disposal jams during service
- Grease trap connection issues
- Sink leaking into the floor
What Sink and Garbage Disposal Services Arlington Heights IL Covers
A plain-language look at what Sink and Garbage Disposal Services involves and when it is needed.
See how it worksSink and garbage disposal services Arlington Heights IL is the trade work that clears, repairs, and replaces everything under your kitchen sink: the basin, faucet, drain assembly, P-trap, supply lines, shut-off valves, and the disposal itself. Most calls start with a disposal that hums but won't spin, a sink that drains slow, or water pooling in the cabinet. We pull the unit, test the motor, check the flange and mounting ring, and inspect the drain line with a sewer camera when the clog runs deeper than the trap.
In Arlington Heights, the mix of older homes near Old Arlington Heights and newer builds out by Arlington Market means we see both ends of the spectrum. Cast iron drains in pre-war houses scale up and trap grease, while newer PVC pipe and PEX tubing setups fail at the disposal flange or the shut-off valve. If you've been searching garbage disposal repair near me Arlington Heights IL at 9 p.m. with a sink full of dishes, we answer, and we carry the common 1/2 HP and 3/4 HP units on the truck so most jobs finish in one visit.
Most sink and disposal calls come down to a jam, a failed flange, or a clog past the trap.
- What it is
- Repair and replacement of kitchen sinks, faucets, drains, supply lines, and garbage disposals.
- When you need it
- When the disposal hums, the sink backs up, or water pools in the cabinet.
- What to expect
- A diagnosis, a written price, the repair, and a full pressure test before we leave.
How a Sink and Disposal Call Runs
No mystery, no waiting around. Here's the sequence from your first call to the final test, and what you'll see us do at each step.
-
Phone Diagnosis
You call (224) 643-9856 and describe what the sink is doing. We ask about the hum, the drain speed, and whether water is pooling in the cabinet. That five-minute conversation tells us what to load on the truck and whether to schedule a same-day slot.
- Call
- Describe
- Book
-
On-Site Inspection
We arrive, lay a drop cloth, and pull everything out from under the sink. The disposal gets tested for power and spin, the P-trap and drain assembly get checked for corrosion, and we run a pressure gauge on the supply lines. You get a plain-English explanation of what failed.
- Inspect
- Test
- Explain
-
Upfront Price
Before any wrench turns, you get a written price for the repair or replacement. If the disposal motor is shot, we quote the unit and the labor together. If it's just a jam, the price reflects that. You approve it or we walk, no pressure.
- Quote
- Approve
- Schedule
-
Repair or Replace
A jammed disposal gets cleared with an auger or Allen wrench and tested. A failed unit gets swapped for a new one, usually a 3/4 HP Moen or Delta model, with the flange and mounting ring resealed in plumber's putty. Sink leaks get new supply lines and shut-off valves as needed.
- Repair
- Replace
- Reseal
-
Test and Cleanup
We run hot water through the disposal for a full minute, check every connection under the sink with a dry paper towel, and confirm the drain empties fast. The cabinet gets wiped down, the old unit goes with us, and you get a walkthrough of what we did.
- Test
- Clean
- Walkthrough
Tools and Methods We Use
Move across a circle, or focus it and press Enter, for an illustrative thermal view of the photograph.
RIDGID drain snake
Clears clogs in the branch line past the P-trap when a plunger won't do it. We use it on slow kitchen drains before recommending anything bigger.
Milwaukee auger
Clears disposal jams and drain blockages with controlled torque. It's the tool that saves a disposal when the flywheel is stuck.
Sewer camera
Shows what's actually inside the drain line: grease, scale, root intrusion, or a collapsed section. We record the inspection and show you the footage.
Hydro jetter
Blasts grease and scale from kitchen drain lines with high-pressure water. It's the fix when snaking keeps clearing the same clog.
Leak detection equipment
Finds hidden leaks at the disposal flange, supply line, or drain assembly without tearing apart the cabinet.
Thermal views are illustrative, generated from the photographs.
Methods
Pressure gauge
Checks supply line pressure before and after a repair to confirm the fix holds and the pressure is in the normal range.
Pipe cutter and PEX crimping tool
Cuts and connects PEX tubing and copper pipe when a supply line needs replacement. Clean cuts mean fewer leaks.
Illinois Plumbing License standards
Every drain and supply connection we make follows the state plumbing code, including proper P-trap depth, venting, and disposal discharge sizing. It's not optional, and we don't cut corners on it.
Pressure testing
After a repair, we run full pressure through the supply lines and check every connection with a dry towel. If it's going to leak, we want to see it before we leave, not you.
Camera-first diagnosis
When a sink clog keeps coming back, we run a sewer camera before recommending a fix. It tells us whether the problem is in the branch line, the main line, or the pipe itself.
Flange resealing
A disposal flange leak is common and preventable. We reseal with plumber's putty and check the mounting ring torque so the connection stays dry.
When to Call for Sink and Disposal Help
Humming disposal
A homeowner in Scarsdale hears the disposal hum but the blades won't turn, and the sink is full of dishes.
We cut power at the breaker, clear the jam with an auger, and test the flywheel. If the motor is fine, the fix takes about 20 minutes. If not, we replace the unit from stock on the truck.
Outcome: The sink is usable again the same day, usually within two hours of the call.
Leak under sink
A property manager near the Arlington Heights Business District finds water under a tenant's kitchen sink.
We trace the leak to the disposal flange or supply line, replace the failed parts, and pressure-test the repair. We send photos of the finished work to the manager.
Outcome: The leak is fixed in one visit, and the manager has documentation for the owner.
New sink install
A homeowner in Old Arlington Heights is remodeling and wants a new sink and disposal installed.
We disconnect the old basin, set the new sink, install a 3/4 HP disposal, and reconnect the supply lines and drain assembly to code.
Outcome: A finished, tested kitchen sink setup in two to four hours, with the old unit hauled away.
Commercial jam
A restaurant owner near the Miner Street Corridor has a commercial disposal that keeps jamming during dinner service.
We inspect the unit, clear the jam, and check the drain line with a sewer camera. If the unit is undersized for the volume, we quote a commercial replacement.
Outcome: The kitchen gets through service without a backup, and the owner knows whether a replacement is coming.
Slow drain
A homeowner in Creekside notices the sink drains slowly and smells faintly of grease.
We clear the branch line with a drain snake, then run a sewer camera to check for deeper buildup. If the line is scaled, we hydro jet it clean.
Outcome: The sink drains fast again, and the smell is gone.
How Sink and Disposal Work Runs in Arlington Heights
Arlington Heights has a mix of housing stock that changes how we approach every sink job. Pre-war homes near Old Arlington Heights and Hasbrook often have cast iron drain lines that scale up and trap grease, so a slow sink there usually means more than a disposal problem.
Newer builds out by Arlington Market and Creekside use PVC pipe and PEX tubing, and the failures we see are more often at the disposal flange or a factory-tightened supply connection. Winter matters too: frozen pipes in an exterior kitchen wall can crack a supply line, and the first sign is often water under the sink.
We keep a sewer camera and hydro jetter on the truck because a sink that backs up in January is usually a different problem than one that backs up in July. If you're searching for kitchen sink leak repair Arlington Heights 60004, we can usually get there the same day.
- Old Arlington Heights: Older homes with cast iron drains that scale up and trap grease, which makes slow sinks a common call.
- Arlington Market: Newer construction with PVC and PEX, where disposal flange leaks and factory-tightened supply connections are the usual failures.
- Scarsdale: Mid-century homes with original shut-off valves that seize up, so we check them on every sink call.
- Creekside: Kitchen drains that share a branch line with laundry, so a slow sink can point to a deeper clog.
- Freezing winter temperatures: Exterior kitchen walls can freeze supply lines, and the first sign is often a leak under the sink. We check the line and insulate where needed.
- Hard water in Cook County: Mineral scale builds up on disposal components and faucet aerators, shortening the life of both. A water softener or regular cleaning helps.
We walk through the problem and explain what we find Drop cloths go down and the cabinet gets cleared We test the repair and show you the result
From problem to finished result.
Humming Disposal to Working Sink
Before: A homeowner in Scarsdale had a disposal that hummed but wouldn't spin. The sink was full of dishes, and the breaker had tripped twice. They'd tried the reset button with no luck and were ready to buy a new unit.
After: We cleared a jammed flywheel with an auger in about 15 minutes, tested the motor under load, and confirmed the breaker held. The homeowner paid for a service call and a jam clear instead of a new disposal.
Run cold water while grinding and avoid putting bones, coffee grounds, or fibrous vegetables down the disposal. A monthly ice-and-citrus grind keeps the blades clean.
Leaking Flange to Dry Cabinet
Before: A property manager near the Arlington Heights Business District found water pooling under a tenant's kitchen sink. The cabinet floor was soft, and the leak had been going on long enough to warp the wood.
After: We traced the leak to a failed disposal flange, replaced the mounting ring and resealed with plumber's putty, and replaced the supply lines while we were in there. The cabinet dried out and the repair held under full pressure.
Check under the sink monthly for moisture, and replace supply lines every five to seven years before they bulge or crack.
Slow Drain to Full Flow
Before: A homeowner in Creekside had a sink that drained slowly for weeks and started smelling of grease. A plunger didn't help, and the disposal seemed to be working fine.
After: We ran a drain snake through the branch line, cleared heavy grease buildup, then used a sewer camera to confirm the line was clear. The sink drained fast again, and the smell was gone the same day.
Pour a pot of hot water down the sink weekly and avoid pouring grease down the drain. A yearly drain cleaning keeps the branch line clear.
Sink and Disposal Problems We Fix in Arlington Heights
Most calls come down to a handful of failures. Here's what we see most often and what happens if you let it go.
- Humming disposalDisposal hums but won't spinThe motor overheats and the unit fails completely, often tripping the breaker and leaving a sink full of dirty water. We cut power, clear the jam with an Allen wrench or auger, and test the flywheel. If the motor is burned out, we replace the unit with a 3/4 HP model and test it under load before we leave.
- Cabinet leakWater pooling in the cabinetWe trace the leak with leak detection equipment, usually at the disposal flange, supply line, or P-trap. New fittings, plumber's putty, and Teflon tape go on, and we pressure-test the repair.
- Slow drainSink drains slow after disposal useGrease and food debris build up in the branch line until the sink backs up completely, often during dinner prep. We run a drain snake or auger through the branch line to clear the clog. If it keeps coming back, a sewer camera shows whether the problem is deeper in the line and needs hydro jetting.
- Bottom leakDisposal leaks from the bottomInternal seals fail and water drips onto the cabinet floor every time the unit runs, which can lead to mold and floor damage. A leaking-from-the-bottom disposal usually needs replacement, not repair. We swap the unit, reseal the flange and mounting ring, and check the drain connection for a proper seal.
- Dead disposalFaucet drips and disposal won't turn onA dripping faucet wastes water and a dead disposal means scraping dishes into the trash, which clogs the drain over time. We replace the faucet cartridge or the whole faucet, then diagnose the disposal's power supply, reset button, and motor. Both fixes usually happen in one visit.
Why Arlington Heights Homeowners Call Us
A sink that drains and a disposal that runs, tested before we leave.
Same-Day Disposal Fixes
Most garbage disposal repair Arlington Heights calls are finished in 60 to 90 minutes. We carry RIDGID augers, a drain snake, and replacement units on the truck, so a jammed or dead disposal rarely turns into a second appointment.
Leak Found, Not Guessed
We trace kitchen sink leaks with leak detection equipment and a pressure gauge instead of tearing apart the cabinet. Plumber's putty, Teflon tape, and new supply lines go on at the same visit, and we test under full pressure before we pack up.
Full Sink Replacements
When a basin is cracked or a 20-year-old faucet won't stop dripping, we handle sink installation Arlington Heights, Illinois jobs start to finish: disconnect, cut out the old drain assembly, set the new sink, and reconnect the disposal and supply lines in one trip.
Code-Correct Connections
We check the shut-off valves and supply lines while we're under there, so the next failure doesn't surprise you.
What you receive
Clear records you can keep and share.
Job photo
Before and after shots of the repair
Parts list
What was replaced and why
Test record
Pressure and drain check noted
Care sheet
Simple upkeep steps for your sink
Repair or replace: what decides it
A jam is usually a repair. A motor that's burned out or a unit leaking from the bottom is usually a replacement.
Repair
The unit has power and the motor is good
- Jam cleared with auger
- Reset button tripped
- Flywheel freed
Replace
The motor or internal seals have failed
- Leaks from the bottom
- Motor hums then trips
- Housing cracked
Upgrade
The unit is undersized or old
- 1/2 HP too small
- Loud or slow grinding
- Frequent jams
What we work with
- Moen
- Delta
- Kohler
- RIDGID
- PEX tubing
- Copper pipe
- PVC pipe
- Plumber's putty
Service ZIP codes.
A list like this tells people straight away whether you cover their street. Not listed? Call and ask: it only takes a minute.
- 60005
- 60004
Towns we serve.
Based in Arlington Heights and covering the places around it. Pick one for local details.
- Downtown Arlington Heights
- Arlington Heights Business District
- Scarsdale
- Northgate
- Pioneer Park
- Greenbrier
- Creekside
- Lake Arlington
- Arlington Market
- Hasbrook
- Westgate
- Countryside
What Arlington Heights Customers Say
Sink and Disposal Questions Arlington Heights Homeowners Ask
A higher-output unit or a corroded flange that needs replacement pushes it toward the top of that range. We quote the full price before we start, so there's no surprise when the job is done.
A humming disposal usually means the motor has power but the flywheel is jammed, often by a bone, fruit pit, or utensil. Turn the breaker off, then try the Allen wrench in the bottom of the unit to free it. If it still hums after that, the motor or capacitor may be failing, and that's when you call us for garbage disposal humming repair Arlington Heights IL.
Yes, most kitchen sink leaks are same-day fixes. We carry supply lines, shut-off valves, P-traps, and plumber's putty on the truck, so a leak at the supply connection, the drain assembly, or the disposal flange is usually handled in one visit. Call (224) 643-9856 before noon and we can often get there the same afternoon.
A standard kitchen sink replacement takes two to four hours, including disconnecting the old basin, setting the new one, and reconnecting the disposal and supply lines. If the cabinet needs modification or the shut-off valves are seized, add an hour. We give you a time window when you book and call ahead when we're on the way.
Other Work We Do Around Your Kitchen
Other services from the same team.
- Sump Pump ServicesSump pump failure during a spring storm floods basements fast. We install, repair, and test Zoeller and other sump pumps, check float switches, and add battery backup. We also inspect discharge lines for freezing and blockage.
- Water Softener Installation and RepairHard water scales up water heaters and clogs fixtures across Cook County. We install and repair water softeners, set regeneration cycles, and test hardness before and after. You will notice better lather and less scale within days.
- Water Filtration System ServicesWhole-home and under-sink filtration removes chlorine, sediment, and taste issues. We install and service filtration systems, change cartridges on schedule, and check pressure drop. Cleaner water from every tap, without bottled water costs.
Get Your Sink and Garbage Disposal Services Arlington Heights IL Today
A humming disposal or a leaking sink won't fix itself. Call (224) 643-9856 and we'll give you a straight price, show up when we say we will, and test the job before we leave. Same-day slots are usually available.
Contact Five Star Plumber LLC
Call (224) 643-9856 or email us and we will get back to you fast. Tell us what is going on and we will tell you what it takes to fix it.